We always upgrade our products with latest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam questions for c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 2
Active Directory Rights Management Services (AD RMS) is deployed on your network.
You need to configure AD RMS to use Kerberos authentication.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Register a service principal name (SPN) for AD RMS.
B. Configure the useAppPoolCredentials attribute in the Internet Information Services (IIS) metabase.
C. Configure the identity setting of the _DRMSAppPool1 application pool.
D. Register a service connection point (SCP) for AD RMS.
Answer: A,B
Explanation:
Reference:
http://technet.microsoft.com/en-us/library/dd759186.aspx
If you plan to use Active Directory Rights Management Services (AD RMS) with Kerberos authentication, you must take additional steps to configure the server running AD RMS after installing the AD RMS server role and provisioning the server. Specifically, you must perform these procedures:
Set the Internet Information Services (IIS) useAppPoolCredentials variable to True
Set the Service Principal Names (SPN) value for the AD RMS service account
NEW QUESTION: 3
Which two options should be used to identify a damaged or failing flash card on an X6 Database Machine high-capacity storage server?
A. Using the CELLCLI CALIBRATE command on the storage server after logging in as the root user
B. Using the CELLCLI LIST LUN DETAIL command as the celladmin user
C. Using the CELLCLI CALIBRATE command on the storage server after logging in as the celladmin user
D. Hardware monitoring using the storage server ILOM
Answer: A,D
Explanation:
The CALIBRATE command runs raw performance tests on cell disks, enabling you to verify the disk performance before the cell is put online. You must be logged on to the cell as the root user to run CALIBRATE.
Oracle ILOM automatically detects system hardware faults and environmental conditions on the server. If a problem occurs on the server, Oracle ILOM will automatically do the following:
Illuminate the Service Required status indicator (LED) on the server front and back panels.
Identify the faulted component in the Open Problems table.
Record system information about the faulted component or condition in the event log.
References:
http://docs.oracle.com/cd/E80920_01/SAGUG/exadata-storage-server-cellcli.htm#SAGUG20617
NEW QUESTION: 4
Which of the following tools is used to translate broad requirements into specific requirements?
A. A process flowchart
B. The theory of constraints (TOC)
C. A quality control plan
D. A critical to quality (CTQ) tree
Answer: D
NEW QUESTION: 2
Active Directory Rights Management Services (AD RMS) is deployed on your network.
You need to configure AD RMS to use Kerberos authentication.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Register a service principal name (SPN) for AD RMS.
B. Configure the useAppPoolCredentials attribute in the Internet Information Services (IIS) metabase.
C. Configure the identity setting of the _DRMSAppPool1 application pool.
D. Register a service connection point (SCP) for AD RMS.
Answer: A,B
Explanation:
Reference:
http://technet.microsoft.com/en-us/library/dd759186.aspx
If you plan to use Active Directory Rights Management Services (AD RMS) with Kerberos authentication, you must take additional steps to configure the server running AD RMS after installing the AD RMS server role and provisioning the server. Specifically, you must perform these procedures:
Set the Internet Information Services (IIS) useAppPoolCredentials variable to True
Set the Service Principal Names (SPN) value for the AD RMS service account
NEW QUESTION: 3
Which two options should be used to identify a damaged or failing flash card on an X6 Database Machine high-capacity storage server?
A. Using the CELLCLI CALIBRATE command on the storage server after logging in as the root user
B. Using the CELLCLI LIST LUN DETAIL command as the celladmin user
C. Using the CELLCLI CALIBRATE command on the storage server after logging in as the celladmin user
D. Hardware monitoring using the storage server ILOM
Answer: A,D
Explanation:
The CALIBRATE command runs raw performance tests on cell disks, enabling you to verify the disk performance before the cell is put online. You must be logged on to the cell as the root user to run CALIBRATE.
Oracle ILOM automatically detects system hardware faults and environmental conditions on the server. If a problem occurs on the server, Oracle ILOM will automatically do the following:
Illuminate the Service Required status indicator (LED) on the server front and back panels.
Identify the faulted component in the Open Problems table.
Record system information about the faulted component or condition in the event log.
References:
http://docs.oracle.com/cd/E80920_01/SAGUG/exadata-storage-server-cellcli.htm#SAGUG20617
NEW QUESTION: 4
Which of the following tools is used to translate broad requirements into specific requirements?
A. A process flowchart
B. The theory of constraints (TOC)
C. A quality control plan
D. A critical to quality (CTQ) tree
Answer: D
NEW QUESTION: 2
Active Directory Rights Management Services (AD RMS) is deployed on your network.
You need to configure AD RMS to use Kerberos authentication.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Register a service principal name (SPN) for AD RMS.
B. Configure the useAppPoolCredentials attribute in the Internet Information Services (IIS) metabase.
C. Configure the identity setting of the _DRMSAppPool1 application pool.
D. Register a service connection point (SCP) for AD RMS.
Answer: A,B
Explanation:
Reference:
http://technet.microsoft.com/en-us/library/dd759186.aspx
If you plan to use Active Directory Rights Management Services (AD RMS) with Kerberos authentication, you must take additional steps to configure the server running AD RMS after installing the AD RMS server role and provisioning the server. Specifically, you must perform these procedures:
Set the Internet Information Services (IIS) useAppPoolCredentials variable to True
Set the Service Principal Names (SPN) value for the AD RMS service account
NEW QUESTION: 3
Which two options should be used to identify a damaged or failing flash card on an X6 Database Machine high-capacity storage server?
A. Using the CELLCLI CALIBRATE command on the storage server after logging in as the root user
B. Using the CELLCLI LIST LUN DETAIL command as the celladmin user
C. Using the CELLCLI CALIBRATE command on the storage server after logging in as the celladmin user
D. Hardware monitoring using the storage server ILOM
Answer: A,D
Explanation:
The CALIBRATE command runs raw performance tests on cell disks, enabling you to verify the disk performance before the cell is put online. You must be logged on to the cell as the root user to run CALIBRATE.
Oracle ILOM automatically detects system hardware faults and environmental conditions on the server. If a problem occurs on the server, Oracle ILOM will automatically do the following:
Illuminate the Service Required status indicator (LED) on the server front and back panels.
Identify the faulted component in the Open Problems table.
Record system information about the faulted component or condition in the event log.
References:
http://docs.oracle.com/cd/E80920_01/SAGUG/exadata-storage-server-cellcli.htm#SAGUG20617
NEW QUESTION: 4
Which of the following tools is used to translate broad requirements into specific requirements?
A. A process flowchart
B. The theory of constraints (TOC)
C. A quality control plan
D. A critical to quality (CTQ) tree
Answer: D
Fortinet FCP_FWB_AD-7.4 Lernhilfe Sie müssen nur Ihre Emails prüfen, Fortinet FCP_FWB_AD-7.4 Lernhilfe Sie können unsere kostenloses Demo downloaden, FCP_FWB_AD-7.4 PDF Testsoftware - FCP - FortiWeb 7.4 Administrator wird herstellt auf eine wissenschaftliche Weise, Fortinet FCP_FWB_AD-7.4 Lernhilfe Die „100% Geld-zurück- Garantie “ ist kein leeres Geschwätz, Nun kann Soaoj FCP_FWB_AD-7.4 PDF Testsoftware Ihnen viel Zeit und Energie ersparen.
Er hat einen schlimmen Anfall gehabt, der sich 300-740 Demotesten jederzeit wiederholen kann, Nein, das würde ihm nicht weiterhelfen, Wir gehen eslangsam an versprach er, Harry stieg allein FCP_FWB_AD-7.4 Lernhilfe die Marmortreppe hoch und ging die Korridore entlang zurück zum Turm der Gryffindors.
Vielleicht war es das Bewusstsein, dass ich meine Strafe abgesessen FCP_FWB_AD-7.4 Lernhilfe hatte und wieder frei war, Ich habe mich mit Professor Snape verständigt, dass du stattdes- sen nächsten Samstag zum Nachsitzen kommst.
Mai Ich hatte etwas im Kopfe, davon ich euch nichts sagen wollte, bis es FCP_FWB_AD-7.4 Examsfragen ausgeführt wäre, Will man einen Freund haben, so muss man auch für ihn Krieg führen wollen: und um Krieg zu führen, muss man Feind sein können.
Als Alice fest aufs Gaspedal trat und mit quietschenden Reifen FCP_FWB_AD-7.4 Lernhilfe wendete es klang wie ein menschlicher Schrei sah ich einen weißen Fetzen am Waldrand, O sprich noch einmal, holder Engel!
Fluch dieser Stund, Natürlich fühlt sich diese FCP_FWB_AD-7.4 Dumps Gruppe nicht missbraucht, Das ist der Mühe wert, sich darüber in den Haaren zu liegen, Die Bohnen werden abgezogen, gebrochen, auf Faeden gezogen FCP_FWB_AD-7.4 Prüfungs und in der Sonne oder auf einem sauberen Backblech in gelinder Ofenwaerme getrocknet.
Sansa hatte noch nie eine solche Rüstung gesehen; polierter FCP_FWB_AD-7.4 Prüfungsmaterialien roter Stahl, in den goldene Schneckenverzierungen eingelegt waren, Wenn die Kapitalrendite in der Zukunft niedrig ist, haben weniger Menschen die finanziellen FCP_FWB_AD-7.4 Mittel, um in den Ruhestand zu gehen, oder sie müssen länger arbeiten, bevor sie in den Ruhestand gehen.
Aomame merkte, dass ihre Stimme ein wenig zitterte, Während das Sprechen FCP_FWB_AD-7.4 PDF Demo auf diese Weise verbal zu sein scheint, gibt Foucault an, dass die meisten in Worten ausgeführten Handlungen Fluchen, Fordern, Versprechen usw.
Hallo, Dad sagten wir beide gleichzeitig, und darüber mussten wir FCP_FWB_AD-7.4 Lernhilfe schon wieder lachen, Es ist schön, Artikel zu sehen, die dies klar artikulieren, Sie decken aber auch andere Arten von Trends ab.
Einen Moment mal, mein Fräulein Hör mal, Dad, ich übernehme die FCP_FWB_AD-7.4 Exam volle Verantwortung für alles, was ich gemacht habe, und von mir aus kannst du mir den Hausarrest meines Lebens verpassen.
Er ist zehn Jahr älter, wie ich, Sind sie nicht widersprach SAFe-RTE PDF Testsoftware Tommen, Verbirgst du deinen Namen, deine Herkunft Mit klugem Vorsatz, Mittlerweile war mir richtig übel.
Er würde die Burg stürmen müssen, Nimm mir meinen Willen, Obwohl diese Medikamente FCP_FWB_AD-7.4 Echte Fragen ohne Rezept illegal sind, werden sie häufig in militärischen Einrichtungen, an der Wall Street, im Silicon Valley und auf Universitätsgeländen eingesetzt.
Wär e es für Charlie nicht besser zu wissen, dass ich lebte FCP_FWB_AD-7.4 Prüfungsinformationen gewissermaßen und glücklich war, Erklärend schlug ich mit einem Trommelstock gegen den Blechladen vor dem Schaufenster.
Noc h immer hielt Aro Edwards Hand fest, FCP - FortiWeb 7.4 Administrator und jetzt beantwortete er eine Frage, die wir anderen nicht gehört hatten.
NEW QUESTION: 1
Instructions
For both the Router and the Switch the simulated console mode needs to start and remain in enabled mode.
RouterA and SwitchA have been configured to operate in a private network which will connect to the Internet. You have been asked to review the configuration prior to cabling and implementation.
This task requires the use of various IOS commands to access and inspect the running configuration of RouterA and SwitchA. No configuration changes are necessary.
You will connect to RouterA and SwilchA via the console devices that are attached to each.
There are 4 multiple-choice questions with this task. Be sure to answer all of them before leaving this item.
In order to score the maximum points you will need to have accessed both SwitchA and RouterA.
NOTE: The configuration command has been disabled for both the router and switch in this simulation.
Which two of the following are true regarding the configuration of RouterA? (Choose two.)
A. console line connections will never time out due to inactivity
B. since DHCP is not used on Fa0/1 there is no need to use the NAT protocol
C. remote connections to RouterA using telnet will succeed
D. only telnet protocol connections to RouterA are supported
E. at least 5 simultaneous remote connections are possible
Answer: C,E
Explanation:
Explanation/Reference:
Explanation:
Here is the RouterA configuration:
for Router
!
!
no service password-encryption
!
hostname Router1
enable secret 5 $1$14mlkm52....
ip domain-name cisco.com
ip ssh version 2
!
!
username ciscouser password 0 cisco
banner login
Soaoj is offering 100% money back guarantee on c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam prep material. If you are not satisfied with the exam results and if you are unable to pass the c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam after using our products then we can provide you 100% money back guarantee. However, if you are using our Exam dumps then you will be able to get 100% guaranteed success in the real c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam. More importantly, we offer a free 3 months updates, and you will always get latest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login questions.
